dispensing
redefined.
dosmatix products are designed to be modular, using a modular principle. Industrial users can benefit from completely new potential in terms of efficiency, cost savings and the ability to integrate their individual dispensing processes. The uncompromising redesign of dosmatix solutions means that requirements for simpler maintenance, more user-friendly control and more economical use of expensive materials as well as consistently perfect dispensing results can be optimally met – whether for sealing, bonding, insulating, potting, sealing or thermal management. Benefit now from the pioneering dispensing technology solutions from dosmatix.
our products – at a glance
Follow a manual added link
dispenser
- piston dispenser dos piston
Material dispensing from 0.1 to 106 ml. - progressive cavity dispenser dos screw
Spot dispensing from 15 µl and continuous bead application.
Follow a manual added link
material preparation
- material preparation dos prep light
For abrasive and non-abrasive materials up to 70,000 mPa·s. - material preparation dos prep
For abrasive and non-abrasive materials up to 70,000 mPa·s. - material preparation dos feed C
For abrasive and non-abrasive materials from cartridges from 70,000 mPa·s. - material preparation dos feed H
For abrasive and non-abrasive materials from hobbocks from 70,000 mPa·s.
Follow a manual added link
kinematics
- integration dos in-line
Dispensing movement in 3 degrees of freedom. - stand-alone dos cell light
Axis movement in 3 degrees of freedom with protection cell in compact format. - stand-alone dos cell
Axis system including protection cell for moving the dispenser through 3 degrees of freedom. - vacuum chamber dos vac
Vacuum chamber with integrated axis system for positioning components in 3 degrees of freedom.
total systems at a glance
Link to: handarbeitsplätze
Manual workstation
(starter-)
solution
Cost-effective and space-saving alternative for manual dispensing applications.
Link to: integrationsmodule
Integration module
Can be combined individually
Individual products can be combined or integrated into production lines.
Link to: standalone-system atmosphäre
Stand-alone
Potting under atmosphere
Automated dispensing systems as stand-alone systems offer the ideal solution for series products.
Link to: standalone-system vakuum
Stand-alone
Potting under vacuum
Depending on the application, potting under vacuum is required for high-quality potting.
dispenser
Different dispensing applications, such as variable dispensing quantities and cycle times, result in specific technical requirements for the dispensers used. dosmatix dispensers offer ideal and custom-fit solutions for the precise dispensing of a wide range of materials and make an important contribution to the uncompromising top quality of the end products.
Link to: dos piston
Piston
Piston
dispenser
dos piston
Material potting from 0.1 to 106 ml for abrasive and non-abrasive materials.
Variants M, L, M-A, L-A
Link to: dos screw
Progressive cavity dispenser
Progressive cavity dispenser
dos screw
Spot dispensing from 15 µl and continuous bead application at a speed of up to 600 ml/min.
Variants: 1C and 2C
material preparation
Potting materials demonstrate a wide range of properties. Reliable dispensing thus requires optimal material preparation (e.g. degassing or temperature control) and fault-free transport of the materials to the dispenser. The type of material influences what type of material preparation is right for the application in question.
Link to: dos prep light
material preparation
dos prep light
Preparation and feeding with a filling volume of 0.5 or 3 liters.
Variants: 1C and 2C
Link to: dos prep
material preparation
dos prep
Preparation and feeding of abrasive and non-abrasive materials up to a viscosity of 70,000 mPa-s.
Variants: 1C and 2C
Link to: dos feed C
material preparation
dos feed C
Conveying abrasive and non-abrasive materials from cartridges with a viscosity of 70,000 mPa-s and above.
Variants: 6 oz. and 20 oz.
Link to: dos feed H
material preparation
dos feed H
Feeding abrasive and non-abrasive materials from hobbocks from a viscosity of 70,000 mPa-s.
Variants: 1C and 2C
kinematics
Diverse production environments and varying requirements of the potting and the process mean dispensers can be integrated in a manual workplace or fully automated CNC kinematic solution. dosmatix offers flexible solutions and delivers tailor-made additional functions to ensure reliability and safety in your potting process.
Link to: dos inline
Integration
dos in-line
Axis system for movement of the dispenser in 3 degrees of freedom.
Variants: S, M, L
Link to: dos cell light
Stand-alone
dos cell light
Compact dispensing robot incl. protection cell with axis movement in 3 degrees of freedom.
Link to: dos cell
Stand-alone
dos cell
Axis system including protection cell for movement of the dispenser through 3 degrees of freedom.
Variants: S, M, L
Link to: dos vac
Vacuum chamber
dos vac
Vacuum chamber with integrated axis system for positioning components in 3 degrees of freedom.
Variants: M, L
